The Math Behind Mixing Ratio Lines

Mixing ratio lines on a Skew-T show where a given amount of water vapor saturates the air. Here's the physics behind them.

Defining Mixing Ratio

The mixing ratio w is the mass of water vapor per unit mass of dry air:

w = mvapor / mdry air

It's typically expressed in grams per kilogram (g/kg). For unsaturated air, w stays constant as the parcel rises — no vapor is being added or removed. This makes it a conserved quantity, which is why it's so useful for tracking moisture.

Saturation Mixing Ratio

The saturation mixing ratio ws is the maximum mixing ratio the air can hold at a given temperature and pressure:

ws = 0.622 × es(T) / (P - es(T))

where es(T) is the saturation vapor pressure, computed from the Tetens formula:

es(T) = 611.2 × exp(17.67 T / (T + 243.5))  [Pa]

Drawing Mixing Ratio Lines

A mixing ratio line on the Skew-T answers the question: "At each pressure level, what temperature would make the saturation mixing ratio equal to this value?"

For a given w (say 8 g/kg = 0.008 kg/kg), at each pressure P we solve for the temperature T where ws(T, P) = w:

  1. Compute the required vapor pressure: es = w P / (0.622 + w)
  2. Invert the Tetens formula to find T: T = 243.5 × ln(es/611.2) / (17.67 - ln(es/611.2))

Plot that temperature at each pressure level and you get one mixing ratio line.

Why They Tilt Right

At lower pressures (higher altitudes), the same vapor content represents a larger fraction of the total air mass. This means the air saturates at a lower temperature. But on a Skew-T, lower pressure (higher up) also shifts the x-coordinate to the right due to the skew. The net effect is that mixing ratio lines tilt from lower-left to upper-right — nearly vertical, but leaning slightly to the right.

Finding the LCL

The Lifted Condensation Level (LCL) — cloud base for a thermal — is where a surface parcel's mixing ratio line intersects its DALR line:

  • Start the DALR from the surface temperature.
  • Start the mixing ratio line from the surface dew point (the dew point tells you the parcel's actual mixing ratio).
  • Where they cross, the rising parcel has cooled to its own dew point — condensation begins.

This is the parcel's own saturation point, independent of what the environmental red and green lines are doing at that altitude.